Key Index - SAES Engineering Standards List | Excel
SAES Index - List of Active Engineering Standards Documents | SAUDI ARABIAN OIL COMPANY | Excel Spreadsheet Free Download
Saudi Aramco Engineering Standards (SAES) are standards, approved by Saudi Aramco Management, that establish minimum requirements for the selection, design, construction, test, maintenance, and repair of equipment and facilities.
Active Engineering standards. The following standards can be downloaded in MS-Excel Spreadsheet format.
This Excel Spreadsheet lists over 300 Saudi Aramco Engineering Standards (SAES) documents that provide requirements and criteria for various engineering disciplines, systems, and equipment for industrial facilities. The standards cover topics such as process design, equipment design, piping, instrumentation, electrical systems, coatings, security, and more.
SAES INDEX SPREADSHEET (XLSX)
SAES Reference and Codes
SAES-A-004 -- General Requirements for Pressure Testing
SAES-A-005 -- Safety Instruction Sheet
SAES-A-007 -- Hydrostatic Testing Fluids and Lay-Up Procedures
SAES-A-020 -- Equipment Specific P&ID Templates (ESPT)
SAES-A-100 -- Survey Coordinates, Datum's and Data Formats
SAES-A-102 -- Ambient Air Quality and Source Emissions Standards
SAES-A-103 -- Discharges to the Marine Environment
SAES-A-104 -- Wastewater Treatment, Reuse and Disposal
SAES-A-105 -- Noise Control
SAES-A-109 -- Site Planning for Prayer Shelters
SAES-A-111 -- Borrow Pit Requirements
SAES-A-112 -- Meteorological and Seismic Design Data
SAES-A-113 -- Geotechnical Engineering Requirements
SAES-A-114 -- Excavation and Backfill
SAES-A-115 -- Groundwater Monitoring Well Design, Installation, and Decommissioning
SAES-A-202 -- Saudi Aramco Engineering Drawing Preparation
SAES-A-204 -- Preparation of Structural Calculations
SAES-A-205 -- Oilfield Chemicals
SAES-A-206 -- Positive Material Identification
SAES-A-207 -- Catalyst and Desiccant Selection and Replacement
SAES-A-208 -- Water Treatment Chemicals
SAES-A-210 -- Management of Pyrophoric Wastes
SAES-A-302 -- Aviation Fuel Quality Assurance Design Requirement
SAES-A-400 -- Industrial Drainage Systems
SAES-A-401 -- Closed Drain Systems (CDS)
SAES-A-403 -- Offshore Platform Drainage Systems
SAES-B-005 -- Spacing and Diking for Atmospheric and Low-Pressure Tanks.
SAES-B-006 -- Fireproofing for Plants
SAES-B-008 -- Restrictions to Use of Cellars, Pits, and Trenches
SAES-B-009 -- Fire Protection and Safety Requirements for Offshore Production Facilities
SAES-B-014 -- Safety Requirements for Plant and Operations Support Buildings
SAES-B-017 -- Fire Water System Design
SAES-B-018 -- Foam Systems
SAES-B-019 -- Portable, Mobile and Special Fixed Firefighting Equipment
SAES-B-053 -- Machine and Equipment Safety Guarding, Elevators, Escalators, and Conveyors
SAES-B-054 -- Access, Egress, and Materials Handling for Plant Facilities
SAES-B-055 -- Plant Layout
SAES-B-057 -- Safety Requirements: Refrigerated and Pressure Storage Tanks and Vessels
SAES-B-058 -- Emergency Shutdown, Isolation, and Depressuring
SAES-B-060 -- Fire Protection for Piers, Wharves and Sea Islands
SAES-B-061 -- Protective Shields for High Health Hazard Piping and Equipment
SAES-B-062 -- Onshore Wellsite Safety
SAES-B-063 -- Aviation Obstruction Marking and Lighting
SAES-B-064 -- Onshore and Nearshore Pipeline Safety
SAES-B-067 -- Safety Identification and Safety Colors
SAES-B-068 -- Electrical Area Classification
SAES-B-069 -- Emergency Eyewashes and Showers
SAES-B-070 -- Fire and Safety Requirements for Bulk Plants, Air Fueling Terminals and Sulfur Handling Facilities
SAES-C-001 -- Process Design of Trays and Packing
SAES-D-001 -- Design Criteria for Pressure Vessels
SAES-D-008 -- Repairs, Alterations, and Re-rating of Process Equipment
SAES-D-100 -- Design Criteria of Atmospheric and Low-Pressure Tanks
SAES-D-101 -- Regulated Vendors List for Pressure Vessels and Tanks
SAES-D-108 -- Repair, Alteration and Reconstruction of Storage Tanks
SAES-D-109 -- Design of Small Metallic Storage Tanks
SAES-D-110 -- Design of Fiberglass-Reinforced Plastic (FRP) Storage Tanks
SAES-D-116 -- Underground Storage Tank System
SAES-E-004 -- Design Criteria of Shell and Tube Heat Exchangers
SAES-E-006 -- Design Criteria of Double Pipe Heat Exchangers
SAES-E-007 -- Design Criteria of Air-Cooled Heat Exchangers
SAES-E-014 -- Design Criteria of Plate and Frame Heat Exchangers
SAES-E-015 -- Design Criteria of Electric Heat Exchangers
SAES-E-101 -- Regulated Vendors List for Heat Transfer Equipment
SAES-F-001 -- Design Criteria of Fired Heaters
SAES-F-007 -- System Design Criteria of Flares
SAES-G-005 -- Centrifugal Pumps
SAES-G-006 -- Positive Displacement Pumps - Controlled Volume
SAES-G-007 -- Submersible Pumps and Motors for Water Well and Offshore Service
SAES-G-101 -- Regulated Vendors List for Pumps and Mechanical Seals
SAES-G-115 -- Lubrication, Shaft Sealing and Control Oil Systems
SAES-G-116 -- Cleanliness Standard for Lube/Seal Oil and Fluid Power Systems
SAES-H-001 -- Coating Selection and Application Requirements for Industrial Plants and Equipment
SAES-H-002 -- Internal and External Coatings for Steel Pipelines and Piping
SAES-H-002V -- Approved Saudi Aramco Data Sheets for the Pipeline and Piping Coatings
SAES-H-003 -- Protective Coatings for Industrial Concrete Structures
SAES-H-004 -- Protective Coating Selection and Application Requirements for Offshore Structures and Facilities
SAES-H-101V -- Approved Saudi Aramco Data Sheets - Paints and Coatings
SAES-H-102 -- Safety Requirements for Coating Applications
SAES-H-200 -- Storage, Handling and Installation of Externally Coated Pipe
SAES-H-201 -- General Specifications for Over-the-Ditch External and Internal FBE Coating of Field Girth Welds
SAES-H-204 -- General Specifications and Application Procedures of Heat-Shrink Sleeves to Coated Pipe
SAES-I-001 -- ESP System - Design and Procurement
SAES-I-002 -- ESP System - Supplier Integration
SAES-J-001 -- Instrumentation Index
SAES-J-002 -- Technically Acceptable Instrument Manufacturers
SAES-J-003 -- Instrumentation - Basic Design Criteria
SAES-J-004 -- Instrumentation Symbols and Identification
SAES-J-005 -- Instrumentation Drawings and Forms
SAES-J-100 -- Process Flow Metering
SAES-J-200 -- Pressure
SAES-J-300 -- Level
SAES-J-400 -- Temperature
SAES-J-502 -- Analyzer Shelters
SAES-J-504 -- Sample Conditioning Systems for Process Analyzers
SAES-J-505 -- Combustible Gas and Hydrogen Sulfide in Air Detection Systems
SAES-J-600 -- Pressure Relief Devices
SAES-J-601 -- Emergency Shutdown and Isolation Systems
SAES-J-602 -- Burner Management, Combustion and Waterside Control Systems for Watertube Boilers
SAES-J-603 -- Process Heaters Safety Systems
SAES-J-604 -- Protective and Condition Monitoring Equipment for Rotating Machinery
SAES-J-605 -- Surge Relief Protection Systems
SAES-J-607 -- Burner Management Systems for SRU Trains
SAES-J-700 -- Control Valves
SAES-J-801 -- Control Buildings
SAES-J-901 -- Instrument Air Supply Systems
SAES-J-902 -- Electrical Systems for Instrumentation
SAES-J-903 -- Intrinsically Safe Systems
SAES-J-904 -- FOUNDATION TM Fieldbus (FF) Systems
SAES-J-905 -- Instrument Asset Management Systems (IAMS)
SAES-K-001 -- Design and Installation of Heating, Ventilating and Air Conditioning Systems
SAES-K-002 -- Air Conditioning Systems for Essential Operating Facilities
SAES-K-003 -- Air Conditioning Systems for Communications Buildings
SAES-K-011 -- Building Management System
SAES-K-100 -- Saudi Aramco Mechanical (HVAC) Code
SAES-K-101 -- Regulated Vendors List for Heating, Ventilating and Air Conditioning (HVAC) Equipment
SAES-K-110 -- Regulated Vendors List for Compressors, Expanders, Gears and Steam Turbines
SAES-K-115 -- Regulated Vendors List for Combustion Gas Turbines
SAES-K-400 -- Basic Selection of Compressors
SAES-K-402 -- Centrifugal Compressors
SAES-K-403 -- Reciprocating Compressors
SAES-K-501 -- Steam Turbines
SAES-K-502 -- Combustion Gas Turbines
SAES-K-511 -- Diesel Engines
SAES-K-600 -- Side-Entry Mixers
SAES-L-100 -- Applicable Codes and Standards for Pressure Piping Systems
SAES-L-101 -- Regulated Vendors List for Pipes and Fittings
SAES-L-102 -- Regulated Vendors List for Valves
SAES-L-105 -- Piping Material Specifications
SAES-L-108 -- Selection of Valves
SAES-L-109 -- Selection of Flanges, Stud Bolts and Gaskets
SAES-L-110 -- Limitations on Pipe Joints and Components
SAES-L-120 -- Piping Flexibility Analysis
SAES-L-125 -- Safety Instruction Sheet for Piping and Pipelines
SAES-L-131 -- Fracture Control of Line Pipe
SAES-L-132 -- Material Selection for Piping Systems
SAES-L-133 -- Corrosion Protection Requirements for Pipelines, Piping and Process Equipment
SAES-L-136 -- Pipe, Flange and Fitting Material Requirements
SAES-L-140 -- Thermal Expansion Relief in Piping
SAES-L-150 -- Pressure Testing of Plant Piping and Pipelines
SAES-L-310 -- Design of Plant Piping
SAES-L-350 -- Construction of Plant Piping
SAES-L-410 -- Design of Pipelines
SAES-L-420 -- Scraper Trap Station and Appurtenances
SAES-L-440 -- Anchors for Buried Pipelines
SAES-L-450 -- Construction of On-Land and Near-Shore Pipelines
SAES-L-460 -- Pipeline Crossings Under Roads and Railroads
SAES-L-470 -- Trenchless Pipelines Construction Requirements
SAES-L-610 -- Nonmetallic Piping in Oily Water Services
SAES-L-620 -- Design of Nonmetallic Piping in Hydrocarbon and Water injection Systems
SAES-L-650 -- Construction of Nonmetallic Piping in Hydrocarbon and Water Injection Systems
SAES-L-810 -- Design of Piping on Offshore Structures
SAES-L-850 -- Design of Submarine Pipelines and Risers
SAES-M-001 -- Structural Design Criteria for Non-Building Structures
SAES-M-005 -- Design and Construction of Fixed Offshore Platforms
SAES-M-006 -- Saudi Aramco Security and General Purpose Fencing
SAES-M-009 -- Design Criteria for Blast Resistant Buildings
SAES-M-100 -- Saudi Aramco Building Code
SAES-N-001 -- Basic Criteria, Industrial Insulation
SAES-N-004 -- Design and Installation of Building Thermal Insulation
SAES-N-100 -- Refractory Systems
SAES-N-110 -- Installation Requirements - Castable Refractories
SAES-N-120 -- Installation Requirements - Extreme Erosion Resistant Refractories
SAES-N-130 -- Installation Requirements - Fireclay Bricks
SAES-N-140 -- Installation Requirements - Refractory Ceramic Fiber
SAES-O-201 -- Application of Security Directives
SAES-O-202 -- Security Fencing
SAES-O-203 -- Security Gate
SAES-O-204 -- Security Lighting
SAES-O-205 -- Integrated Security System
SAES-O-206 -- Security Devices
SAES-O-207 -- Power Supply for Security Systems
SAES-O-208 -- Communications for Security Systems
SAES-O-209 -- Security Doors
SAES-O-210 -- Security Locks
SAES-O-211 -- Identification Cards
SAES-O-212 -- Security Information Protection
SAES-P-100 -- Basic Power System Design Criteria
SAES-P-101 -- Regulated Vendors List for Electrical Equipment
SAES-P-103 -- UPS and DC Systems
SAES-P-104 -- Wiring Methods and Materials
SAES-P-107 -- Overhead Distribution Systems
SAES-P-111 -- Grounding
SAES-P-113 -- Motors and Generators
SAES-P-114 -- Power System and Equipment Protection
SAES-P-116 -- Switchgear and Control Equipment
SAES-P-119 -- Onshore Substations
SAES-P-121 -- Transformers and Reactors
SAES-P-123 -- Lighting
SAES-P-126 -- Power System Automation
SAES-Q-001 -- Criteria for Design and Construction of Concrete Structures
SAES-Q-004 -- Installation of Piles and Conductors for Offshore Structures
SAES-Q-005 -- Concrete Foundations
SAES-Q-006 -- Asphalt and Sulfur Extended Asphalt Concrete Paving
SAES-Q-007 -- Foundations and Supporting Structures for Heavy Machinery
SAES-Q-009 -- Concrete Retaining Walls
SAES-Q-010 -- Cement Based, Non-Shrink Grout for Structural and Equipment Grouting
SAES-Q-011 -- Epoxy Grout for Machinery Support
SAES-Q-012 -- Criteria for Design and Construction of Precast and Prestressed Concrete Structures
SAES-R-004 -- Building Architectural Finishes Requirements
SAES-R-004A1 -- Building Design & Finishing Guidelines
SAES-S-007 -- Solid Waste Landfill Requirements
SAES-S-010 -- Sanitary Sewers
SAES-S-020 -- Oily Water Drainage Systems
SAES-S-030 -- Storm Water Drainage Systems
SAES-S-040 -- Saudi Aramco Water Systems
SAES-S-050 -- Sprinkler and Standpipe Systems in Buildings
SAES-S-060 -- Saudi Aramco Plumbing Code
SAES-S-070 -- Installation of Utility Piping Systems
SAES-T-000 -- Telecommunications Standards Introduction and Indices
SAES-T-018 -- Telecommunications - Symbols, Abbreviations and Definitions
SAES-T-101 -- Regulated Vendors List for Communications Equipments and Materials
SAES-T-151 -- D.C. Power Systems
SAES-T-360 -- Synchronous Digital Hierarchy Transmission Systems
SAES-T-481 -- In-Plant Voice Paging System
SAES-T-492 -- VHF/UHF Land-Mobile and Fixed Radio Communication
SAES-T-493 -- Digital Trunked Radio System
SAES-T-494 -- Very Small Aperture Terminal (VSAT) Network Design
SAES-T-500 -- Central Office (CO) Digital Telephone Switching Systems
SAES-T-521 -- Circuit Measuring Techniques
SAES-T-555 -- IP Based Closed-Circuit Television (CCTV)
SAES-T-556 -- Circuit Quality and Performance
SAES-T-570 -- Design Residential Telecommunications Infrastructure
SAES-T-603 -- Telecommunications - Safeguards and Warning Devices
SAES-T-624 -- Telecommunications Outside Plant - Fiber Optics
SAES-T-625 -- Inter and Intra Building Fiber Optic Communication Cables
SAES-T-628 -- Telecommunications - Underground Cable
SAES-T-629 -- Telecommunications Buried Cable and Wire
SAES-T-631 -- Communications Cable Terminals
SAES-T-632 -- Communications Cable Splicing
SAES-T-633 -- Communications Splice Closures
SAES-T-634 -- Telecommunications - Cable Testing and Acceptance
SAES-T-744 -- Design Criteria and Installation of Communication Towers
SAES-T-795 -- Communications Facility Grounding Systems
SAES-T-820 -- Narrow-Band Video Conferencing Systems
SAES-T-830 -- Voice Frequency Loop Transmission Objectives
SAES-T-883 -- Telecommunications - Inductive Coordination
SAES-T-887 -- Telecommunications: Electrical Coordination - Protection at Power Plants and Radio Stations
SAES-T-903 -- Outside Plant Electrical Protection and Grounding
SAES-T-906 -- Telecommunications - Structural Coordination
SAES-T-911 -- Telecommunication Conduit System Design
SAES-T-912 -- Communications Feeder Cable
SAES-T-914 -- Comunications Distribution Cable
SAES-T-916 -- Communications Building Cable
SAES-T-919 -- Submarine Fiber Optic Cable
SAES-T-920 -- Telecommunications Cable Information
SAES-T-928 -- Telecommunications - OSP Buried Plant
SAES-T-938 -- Telecommunications: Outside Plant Systems - Design
SAES-W-010 -- Welding Requirements for Pressure Vessels
SAES-W-011 -- Welding Requirements for On-Plot Piping
SAES-W-012 -- Welding Requirements for Pipelines
SAES-W-013 -- Welding Requirements for Offshore Structures
SAES-W-014 -- Weld Overlays and Welding of Clad Materials
SAES-W-015 -- Strip Lining Application
SAES-W-016 -- Welding of Special Corrosion-Resistant Materials
SAES-W-017 -- Welding Requirements for API Tanks
SAES-W-019 -- Girth Welding Requirements for Clad Pipes
SAES-X-300 -- Cathodic Protection of Marine Structures
SAES-X-400 -- Cathodic Protection of Buried Pipelines
SAES-X-500 -- Cathodic Protection of Vessel and Tank Internals
SAES-X-600 -- Cathodic Protection of Plant Facilities
SAES-X-700 -- Cathodic Protection of Onshore Well Casings
SAES-X-800 -- Cathodic Protection for Existing Reinforced Concrete Structures
SAES-Y-100 -- Regulated Vendors List for Royalty/Custody Measurement Equipment
SAES-Y-101 -- Custody Metering of Hydrocarbon Gases
SAES-Y-103 -- Royalty/Custody Metering of Hydrocarbon Liquids
SAES-Y-301 -- Royalty/Custody Measurement of Hydrocarbon Liquids using Radar Tank Gauging Systems
SAES-Y-501 -- Dynamic Sampling of Hydrocarbon Liquids for Royalty/Custody Transfers
SAES-Z-000 -- Process Control Standards Index
SAES-Z-001 -- Process Control Systems
SAES-Z-002 -- Technically Accepted Process Automation Systems
SAES-Z-003 -- Pipelines Leak Detection Systems
SAES-Z-004 -- Supervisory Control and Data Acquisition (SCADA) System
SAES-Z-010 -- Process Automation Networks
SAES-Z-020 -- Design and Installation of Fiber Optic Cable Systems for Process Control Networks